Checklist
Documents required
- 1PAN card of the unit
- 2Certificate of Incorporation / Partnership Deed
- 3Address proof / land documents / lease deed
- 4Approved building plan and site layout
- 5Detailed Project Report (DPR) with manufacturing process and capacity
- 6List of raw materials and finished products with quantities
- 7Water balance chart and effluent treatment plan
- 8Air emission sources and air pollution control equipment details
- 9Hazardous waste generation and disposal plan
- 10Fire NOC and Factory plan approval (for Red / Orange units)
Process
Step-by-step process
- 1Identify the category of the unit (Red / Orange / Green / White) from the CPCB schedule
- 2Register on the J&K PCC online portal
- 3Apply for Consent to Establish (CTE) before any construction begins
- 4Upload the DPR, water balance, ETP design and pollution control equipment specs
- 5Pay the consent fee — based on total capital investment
- 6Site inspection by the Regional Officer of J&K PCC
- 7Receive CTE — valid for 5 years (long-term consent regime)
- 8After commissioning, apply for Consent to Operate (CTO)
- 9CTO inspection verifies installed ETP / APC equipment and stack emissions
- 10Receive CTO — valid 5–15 years depending on category (renewable)
As of 2026
Fees & timeline
| Green category — small (investment up to ₹50 lakh) | ₹3,500 · 30 days |
|---|---|
| Orange category — medium (₹5–10 crore) | ₹50,000–1,50,000 · 45 days |
| Red category — large (₹10–100 crore) | ₹2,00,000–5,00,000 · 60 days |
| CTE validity | 5 years |
| CTO validity | 5 yrs (Red) · 10 yrs (Orange) · 15 yrs (Green) |
| Renewal application | Minimum 120 days before expiry |
Figures reviewed as of September 2026. Government fees may change without notice.
Frequently asked questions
- Yes, if the restaurant operates a wood-fired oven, tandoor or has diesel-genset above 125 kVA. Such restaurants fall under the Orange or Green category and require Consent to Operate from J&K PCC. AC-only restaurants without combustion sources may be exempt.
- Consent to Establish (CTE) is the pre-construction approval issued before setting up the unit. Consent to Operate (CTO) is the post-commissioning approval issued after pollution control equipment is installed and tested, allowing actual operations.
- Industries are classified into four categories based on the Pollution Index (PI) defined by CPCB: Red (PI ≥ 60), Orange (41 ≤ PI < 60), Green (21 ≤ PI < 41) and White (PI < 21). White category units are exempt from consent but must intimate JKPCC.
- CTO validity depends on category: 5 years for Red, 10 years for Orange and 15 years for Green industries. Renewal applications must be filed at least 120 days before expiry to avoid penalty.
Does a restaurant in Jammu need pollution NOC?+
What is the difference between CTE and CTO?+
How are industries classified by J&K Pollution Control Committee?+
How long is Consent to Operate valid in J&K?+
Based in Jammu? We handle pollution noc (cte / cto) in j&k — apply online (2026) locally — see our detailed Jammu guides for FSSAI licence renewal in Jammu.